Chapter 10: Camera setup
TruVision DVR 44HD User Manual
77
Note
: It is not recommended to use the V-stream feature when an analog monitor is used as a
main monitor because the analog main monitor and the V-stream use the same output.
To enable V-streaming:
1. Click the
Display Settings
>
V-stream Encoding
.
2. Check
Enable V-stream Encoding
.
3. Select
the desired settings for frame rate and maximum bit rate (Kbps).
4. Click
Apply
to save the settings and
Exit
to return to live view.
To configure V-streaming:
The V-stream shows video on the recorder’s BNC output.
1. Click the
Display Settings
>
Display
>
Video Output Interface
and select
Main BNC
.
2. Under
Default View
, select the desired view format.
3. Under
Sequence Dwell Time
, select the desired camera sequence mode.
Note
: Sequencing can only be done in single-view display mode.
4. Click the
Display Settings
>
Layout
>
Video Output Interface
and select
Main BNC
.
5. Select the desired sequence order of the cameras.
6. Click
Apply
to save the settings and
Exit
to return to live view.
Содержание TruVision DVR 44HD
Страница 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Страница 174: ......
