Interlogix TruVision DVR 44HD, Руководство пользователя

Страница: 103 / 174

Chapter 14: Device management
TruVision DVR 44HD User Manual 101
Option Description
7. Menu Timeout Define the time in minutes after which the menu window reverts to live view mode.
Select a time from the drop-down list, and click
Apply . Menu timeout also applies
to the system idle time after which a password will be required.
Default value is 5 minutes.
8. Mouse Pointer Speed Modify the speed of the mouse pointer. Adjust the scroll bar point to the desired
level and click Apply.
Default is the slowest of the four speeds.
9. Enable Front Panel Lock When the system logs out, the front panel is automatically locked.
When enabled, to unlock the front panel, press the Live button for 5 seconds.
Default is Disable.
10. Start Wizard This will immediately start the wizard. The system is not rebooted.
Default is Disable.
Configuration files
You can export and import configuration settings from the recorder. This is useful if you want to
copy the configuration settings to another recorder, or if you want to make a backup of the
settings.
Import and export files
Insert an external storage device in the recorder. Go to the Device Management >
Configuration Files to import or export configuration settings. Click Export to export the
recorder’s configuration settings into an external storage device or click Import to import
configuration settings after selecting a configuration file from the external storage device.
Restore default settings
The administrator can reset the recorder to the factory default settings. Network information
such as IP address, subnet mask, gateway, MTU, NIC working mode, server port, and default
route are not restored to factory default settings
To restore parameters to default factory settings:
1. From the menu toolbar, click Device Management > Configuration Files .
Note : Only the administrator can restore the default settings.
2. To restore all parameters to default factory settings:
Click the Default button. Enter the Admin password, click OK , and then click Yes to confirm
that you want to restore all parameters to default.

Or

To restore all parameters, except network settings, to default factory settings: