Interlogix TruVision DVR 40, Руководство пользователя

Страница: 62 / 122

56 TruVision DVR 40 User Manual
b. Go to the
Record Camera
check boxes and select the cameras from which you want to
be able to record a motion alarm. Press Enter, or left-click the mouse, to enable the
option. Press or click again to disable.
Note: For the cameras to be able to record a motion alarm, they must first be setup for
motion recording. This is done in the Recording menu. See“Setting up a camera’s
recording schedule” on page 68 for more information.
c. Go to
Alarm Schedule
and select when you want the TVR 40 to respond to a motion
alarm. You can select up to seven days in a week and up to four time periods for each a
day.
Note: The four daily time periods cannot overlap.
d. Go to the notification options and press Enter or left-click the mouse to enable (  ) or
disable how you want the TVR 40 to respond to a motion alarm during live mode.
Table 9: Notification options on how to respond to a camera tamper alarm
Notification option Description
Alarm Out

Alarm Out is activated. Up to four alarm outputs can be enabled.
Buzzer

An audible alarm sounds
TCP

Alarm information is sent to the remote IP (see “Advanced IP settings
”
on page 74
for more information)
Full Screen

The alarm channel will be displayed on screen
Email

Alarm information is sent to an e-mail address (see “E-mail settings
” on
page 73
for more information)
The TVR 40 returns to live mode when there is no longer a motion alarm.