Interlogix TruVision DVR 40, Руководство пользователя

Страница: 45 / 122

TruVision DVR 40 User Manual 39
Caution:
If there is a power failure during setup, you will loose all user-modified settings. The
system will return to the programmed settings.
Changes to screen settings can be entered in various ways as shown in Table 6 below.
Table 6: Types of control
Control Function Description
Check box Select either enable (
 )
or disable (empty).
Press the joystick to toggle between them or left-click
the mouse.
List box Select one of the listed options.
Front panel:
Move the joystick up or down to select
an option. Press the joystick to accept changes made
in the list box.
IR remote control:
Press the up or down arrows to
select an option. Press OK to accept changes made
in the list box.
Mouse:
Position the mouse cursor on the list box
arrows and left-click the mouse to scroll through the
options.
Edit box An edit box lets you type characters to set the value
of an option. Click the box and an on-screen keyboard
will appear. Depending on the type of information
required, the on-screen keyboard will be numeric or
alphanumeric.
This function can only be done using the mouse.
Left-click the mouse. A numeric or alphanumeric on-
screen display appears. Select the characters
required. When completed, left-click the mouse on the
menu screen to accept changes.
Setup button Execute a function or enter into the next submenu.
A setup button is inactive (grey) until its parameter
option is enabled.
Turning off the TVR 40
Turn off the power switch located on the back of the unit.