Interlogix TruVision DVR 40, Руководство пользователя

Страница: 11 / 122

TruVision DVR 40 User Manual 5
Setting up a PTZ dome camera
Use the USB mouse provided or the optional KTD-405 keypad for local telemetry control. If
using the TVR 40 over a network, use the web browser to control the PTZ dome cameras.
The supported protocols are: GE, Pelco-D, and Pelco-P
For information on setting up the PTZ protocols and presets, see “PTZ settings” on page 86.
Connect a TVR 40 to a PTZ dome camera and keypad
Use the input/output box that is supplied with the keypad to connect a keypad to the TVR 40.
The keypad can be connected to a PTZ camera for local control or for control over the network.
Local control of PTZ dome camera
If you simply want to configure a PTZ dome camera using a keypad, connect the keypad as
shown in Figure 5 below. This setup only functions with the supported PTZ cameras listed in
Figure 5 below. Third-party PTZ cameras are not supported.
This setup does not let you control or configure the PTZ dome cameras using the DVR front
panel, remote control, Web browser or remote software. However, it can be useful to use as a
temporary setup in order to fully configure the PTZ cameras to meet customer requirements.
Once the camera installation is complete, rewire the setup for control over the network. (see
Figure 6 on page 6). The PTZ dome cameras can then be controlled using the DVR front panel,
remote control, Web browser or remote software.
Figure 5: Connecting a keypad to the TVR 40 for local control of a PTZ dome camera
Network control of PTZ dome camera
This is the preferred setup (Figure 6 on page 6.) Any PTZ dome camera to be controlled as the
DVR is doing the PTZ protocol translation. However, this setup provides only limited dome
configuration.