TruVision Series 5 IP Camera Configuration Manual
49
To set up scheduled snapshots:
1. From the menu toolbar, click
Configuration
>
Storage
>
Snapshot
.
2. Select
Enable Timing Snapshot
check box to enable continuous snapshots.
3. Select the desired format of the snapshot, such as JPEG.
4. Select the desired resolution and quality of the snapshot.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds, seconds, minutes, hour, or day.
6. Set the schedule for when you want snapshots to be taken. Click
Edit
and enter the
desired schedule for each day of the week.
7. Click
Save
to save changes.
To set up event-triggered snapshots:
1. From the menu toolbar, click
Configuration
>
Storage
>
Snapshot
.
2. Select the
Enable Event-triggered Snapshot
check box to enable event-triggered
snapshots.
3. Select the desired format of the snapshot, such as JPEG.
4. Select the desired resolution and quality of the snapshot.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds or seconds.
6. Under
Capture Number
, enter the total number of snapshots that can be taken.
7. Click
Save
to save changes.
NAS settings
You can use a network storage system (NAS) to remotely store recordings.
To configure recording settings, please ensure that you have the network storage
device within the network. The NAS disk should be available within the network and
correctly configured to store the recorded files, log files, etc.
Notes
:
1. Up to eight NAS disks can be connected to a camera.
2. The recommended capacity of NAS is between 9G and 2T as otherwise it may
cause formatting failure.