52
TruVision Series 5 IP Camera Configuration Manual
Pre-record time
The pre-record time is set to start recording before the scheduled time or event. For
example, if an alarm triggers recording at 10:00, and the pre-record time is set to 5
seconds, the camera starts to record at 9:59:55. The pre-record time can be configured
as No Pre-record, 5 s, 10 s, 15 s, 20 s, 25 s, 30 s, or Not Limited.
Post-record time
The post-record time is set to stop recording after the scheduled time or the event. For
example, if an alarm triggered recording ends at 11:00, and the post-record time is set
to 5 seconds, the camera records until 11:00:05. The post-record time can be
configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min, or 10 min.
Overwrite
The camera record can be overwritten when
Overwrite
is enabled.
Recording Stream
Main Stream and Substream are alternative for the recording stream.
To set up a recording schedule:
1. From the menu toolbar, click
Configuration
>
Storage
>
Record Schedule
.
2. Select the
Enable Record Schedule
check box to enable recording.
Note:
To disable recording, deselect the option.
3. Click
Edit
to edit the recording schedule. The following window appears: