40
TruVision Series 5 IP Camera Configuration Manual
Figure 12: Face detection window
To define face detection:
1. From the menu toolbar, click
Configuration
>
Smart Event
>
Face Detection
.
2. Select the
Enable Face Detection
check box to enable the function.
3. Select the
Enable Dynamic Analysis
check box for
Face Detection
if you want the
face detected to be marked with a green rectangle in live view.
Note:
If you do not want the detected face marked with the green frame, select
Disable
from Configuration > Local Configuration > Live View Parameters > Rules.
4. Configure the sensitivity of the face detection. The range is between 1 and 5.
5. Click
Edit
to set the arming schedule for the alarm input. See “Motion detection
alarms” on page 30 for more information.
6. Specify the linkage method when an event occurs. Check one or more response
methods for the system when a face detection alarm is triggered.