14
To operate an individual area, enter the number of the partition you wish to operate.
The LCD keypad will now operate as a single area keypad. All keys and functions
entered will affect this individual partition only. The lights and LCD display represent
the status of that partition only. The word "System" will be replaced with the word
"Area #". The following is an example of this feature.
To exit this screen, press [#].
Area 5 is selected and Area 5 is ready to arm. To exit
the individual partition mode, enter [#]-[#].
Silencing Alarms in the Multi-Partition Mode
If the keypad is sounding an alarm or the siren is running, it can be silenced by entering a
code with the authority for the area(s) that are in alarm. NOTE: The [EXIT], [BYPASS], and
Alarm Memory [
U
]-[3] function keys will only work if an individual partition is selected.
SERVICE DISPLAY
The following message will be displayed periodically if the security system requires service.
6HUYLFH5HTXLUHG
7\SH
Á
IRUKHOS
If you see this display, press [
U
]-[2]. One or more
of the following fault messages will be displayed.
Use the scroll keys to browse through them. To
exit the service messages, press [#] [#].
&RQWURO
2YHU&XUUHQW
A short circuit of a control
s power supply has
occurred.
&RQWURO
6LUHQ7URXEOH
Open circuit has occurred on the bell or siren
circuit.
&RQWURO
%R[7DPSHU
(Optional) The Box Tamper circuit has activated.
&RQWURO
3KRQH7URXEOH
The Phone Line connected to the control is not
operating properly.
&RQWURO
)DLOWR&RPP
The control attempted to communicate a message
to the Central Station, but was unsuccessful.
&RQWURO
*URXQG)DXOW
A short to ground has been detected on a
control circuit.
&RQWURO
/RVVRI7LPH
Your system has lost total power and needs the
clock reset.
$UHD5HDG\
7\SHFRGHWRDUP
