6
U
9 2
PROGRAMMING CUSTOM MESSAGES IN THE KEYPAD
NOTES: The messages (custom, zone, and shutdown) are transferred to other LCD keypads
after this mode is exited. All keypads must be addressed and enrolled for this to happen.
Set the keypad numbers with [
7
]-[9]-[4] prior to programming custom messages. If a keypad
is added after messages are programmed, you should either program ALL messages in it,
or enter custom message programming on an existing keypad and make changes. This is to
prevent accidentally overwriting existing messages. See [
7
]-[9]-[3] option to prevent
overwriting the custom message only.
1) Enter [
U
]-[9]-[2]
The LCD Screen will prompt “Please Enter Your Code".
2) Enter [program code]
The LCD will now prompt you to enter message number
followed by [#]. Zones 1 through 192 custom messages are
message numbers 1-192 respectively.
Message 193 - Custom message top line.
Message 194 - Custom message bottom line.
Message 195 - Shutdown message top line.
Message 196 - Shutdown message bottom line.
3) Enter message number to
edit followed by [#]
The LCD will display the zone number on the top line and
the description will be shown on the bottom line. Use the
instructions on page 2 for editing character data. To proceed
to the next location, press the [Police] key. To return to the
previous location, press the [Fire] key. To re-enter the last
location, press the [Auxiliary] key.
4) When completed, exit by pressing [EXIT] while the LCD screen is prompting for a zone
message #. Any changes will automatically be copied to all other LCD keypads in the
system. NOTE: If you desire an LCD keypad to have a different custom message, you
must enable Custom Message Lock under the [
7
]-[9]-[3] function.
For custom messages in the second language:
NOTE: The above [
7
]-[9]-[2] mode must be exited prior to changing languages.
1) Enter [
7
]-[4]-[9]
The keypad is now toggled to the second language.
2) Enter [
U
]-[9]-[2]
The LCD Screen will prompt “Please Enter Your Code".
3) Enter [program code]
The LCD will now prompt you to enter message number
followed by [#]. Zones 1 through 192 custom messages are
message numbers 1-192 respectively.
Message 193 - Custom message top line.
Message 194 - Custom message bottom line.
Message 195 - Shutdown message top line.
Message 196 - Shutdown message bottom line.
4) Enter message number to
edit followed by [#]
The LCD will display the zone number on the top line and
the description will be shown on the bottom line. Use the
instructions on page 2 for editing character data. To proceed
to the next location, press the [Police] key. To return to the
previous location, press the [Fire] key. To re-enter the last
location, press the [Auxiliary] key.
5) When completed, exit by pressing [EXIT] while the LCD screen is prompting for a zone
message #. Any changes will automatically be copied to all other LCD keypads in the
system. NOTE: If you desire an LCD keypad to have a different custom message, you must
enable Custom Message Lock under the [
7
]-[9]-[3] function.
U
U
9 3
SET KEYPAD OPTIONS
1) Enter [
7
]-[9]-[3]
The LCD Screen will prompt “Please Enter Your Code”.
2) Enter [program code]
The LCD will now prompt you through the options listed on
the following chart. The current state of the option will be
shown in the lower right corner of the display. Press [
U
] to
advance to the next option without making changes.
Otherwise, follow the directions on the bottom line to select
the desired option. This will also advance to the next option.
