Chapter 5 - Upgrading the System 67
6.
Select the slot where the board will be installed. Only slots 1 through
3 are valid for the desktop workstation.
7.
When prompted to insert the source disk, insert the diskette containing
the configuration file and press
ENTER
.
8.
When prompted to insert the destination disk, insert the SYSUTIL
diskette and press
ENTER
. The configuration file from the option
board manufacturer will be installed to the system and to the Sys Util
diskette.
9.
Press
ESC
to return to the SCU Main Menu.
10.
Select Step 4 to save the configuration, and then select Step 6 to exit
the SCU.
11.
Remove the diskette from the combo drive; then, restart the system.
ISA Boards without a Configuration File
Some ISA board vendors do not include configuration files with their boards.
For these boards, you must use the SCU to define the ISA board to the
system (that is, manually create a configuration file) by following this
procedure:
➤
To define ISA boards without a configuration file:
1.
Shut down and power off the system.
2.
Insert the SYSUTIL diskette into the floppy diskette slot of the combo
drive; then restart the system.
3.
When the MS-DOS Startup menu displays, select the System
Configuration Utility option.
Содержание TDZ-300
