Intergraph TDZ-300, Руководство по установке и обслуживанию, Страница: 18 / 136

4 Chapter 1 - Getting Started
3. Connect the audio cables (bundled with the keyboard cable) to the
audio jacks. The cable labeled Mic connects to the Microphone jack,
and the cable labeled Audio connects to the Line Out jack. Refer to
the following figure.
4. Connect the mouse cable to the Mouse port on the back of the base
unit. Refer to the following figure.
5. Connect the remaining cables, such as Ethernet (AUI or 10Base-T
ports), printer (parallel port), and modem cables (COM1 and COM2
ports) to their ports on the back of the base unit. Refer to the
following figure.
WARNING
If you are using cables not supplied by Intergraph, you must use
shielded cables to prevent excessive electromagnetic interference
(EMI). Intergraph cables are designed to reduce the amount of EMI
produced by the system.
Note: The ports on the back on the base unit are labeled using PC 95
compliant icons.
Mouse
Line Out
Microphone
Ethernet 10Base-T
AC Voltage
Switch
Parallel
COM1
COM2
MIDI
Ethernet
AUI
Fast
SCSI-2
Keyboard