Intergraph TD-20 Setup, Руководство по установке

Страница: 28 / 66

16
Configuring the Sound Processor
The system is equipped with an on-board sound processor whose driver requires no
configuration. If the system has a microphone and speakers, you can use the operating
system’s sound control programs to control them. Additional accessories for the on-board
sound processor are available from the Intergraph Bulletin Board Service (IBBS) or from
vendor bulletin boards pointed to by the IBBS.
NOTE TD-20 and TD-200 systems have different sound processors and require different sound
processor drivers. TD-20 systems use the Sound Blaster driver; TD-200 systems use the
Crystal Audio driver.
Refer to the operating system documentation and Help for information on using sound control
programs.
Configuring Networking
If you purchased an optional network adapter, it was installed before shipment. You must
configure the operating system to use the network adapter. To do this, you may have to install
network driver software and network adapter control software, and then change operating
system settings to enable networking. Before you do this, make sure the network adapter is
connected to the network.
To configure networking, open Network in the Control Panel. Follow the instructions in the
dialogs to set up the system to use a network. Be sure to set up the appropriate network
protocols, such as Transmission Control Protocol/Internet Protocol (TCP/IP) and NetBIOS
Extended User Interface (NetBEUI), for the network to which your system is connected.
Refer to the documentation for the installed network adapter for detailed configuration
instructions. Refer to the operating system documentation and Help for information on setting
up the system to use a network.
Configuring the PC Card Adapter
If you purchased the optional PC Card adapter, it was installed before shipment, along with its
driver software. No configuration is required.
Refer to Chapter 4, “Operating Notes,” Chapter 6, “Expanding the System, “ and the operating
system documentation and Help for information on using PC Card devices.