Intergraph TD-20 Setup, Руководство по установке

Страница: 37 / 66

25
Using the Audio Input Application (TD-200)
CAUTION The first time you use the Audio Input application for the on-board sound processor on a
TD-200 system, do not start it by selecting Input in the Mixer program. This will disable the
Audio Input application.
To start the Audio Input application for the first time:
u
On a system running Windows NT 4.0, from the Start menu, select Programs, select
Audio Control, and then select Audio Input.
u
On a system running Windows NT 3.51, open Audio Input in Windows NT Program
Manager.
After you have started Audio Input this way once, you can start it thereafter by selecting Input
in the Mixer program. If the Audio Input application becomes disabled, you must re-install
the driver for the on-board sound processor.
Ensuring PC Card Support and Operation
The optional PC Card adapter is used with devices based on standards developed by the
Personal Computer Memory Card International Association (PCMCIA). Windows NT
Workstation and Windows 95 provide support for PC Card devices. Refer to the operating
system documentation and Help for more information on PC Card device support.
CAUTION You must shut down the system before inserting a PC Card device in the PC Card adapter.
When you restart the system, Windows NT Workstation will recognize the PC Card device.
If you will be using a PC Card hard disk device (ATA or AT type) with a system running
Windows NT Workstation, make sure the device drivers that control PC Card hard disk
operation are set to start correctly.
u
On a system running Windows NT Workstation 4.0, both the Atdisk device and the
Pcmcia device should be set to start as System devices.
u
On a system running Windows NT Workstation 3.51, the Atdisk device should be set to
start as a System device, and the Pcmcia device should be set to start as a Boot device.
Do this before inserting a PC Card hard disk device in the PC Card adapter. If you do not,
anomalous behavior may result -- for example, the PC Card hard disk drive may not be
detected by Windows NT Workstation, or may be detected as the system drive (drive C).