Intergraph TD-20 Setup, Руководство по установке

Страница: 39 / 66

27
5 Installing System Software
Follow the instructions in this chapter if you have to re-install the operating system and
associated system software on your Intergraph TD-20 or TD-200 system.
Before You Begin
Have the following items available:
u
The information you recorded under “Preparing for Setup” in Chapter 2, “Setting Up the
Software.”
u
Operating system software CD-ROM, associated diskettes, and documentation. Make
sure you have the Setup diskettes (Windows NT Workstation) or the MS-DOS boot
diskette (Windows 95) delivered with the operating system.
u
Backup diskettes you created according to instructions in Chapter 2, “Setting Up the
Software.”
u
Backup diskettes and documentation delivered with any expansion boards purchased from
Intergraph.
u
The Late-Breaking News document delivered with your system.
System software required during re-installation may be on backup diskettes you created, or on
the operating system software CD-ROM. If you did not have to create backup diskettes
containing drivers or other system software products, they are probably available on the
operating system software CD-ROM or on backup diskettes delivered with expansion boards.
Driver software is routinely improved and updated. Check the Intergraph Bulletin Board
Service (IBBS) and vendor bulletin boards frequently for new and updated drivers.
Review the Late-Breaking News document delivered with your system for any additional tasks
you may have to perform during re-installation.