background image

10

On a system running Windows 95:

While Windows 95 files are being copied to the system, you are prompted for the
Windows 95 Setup Boot Diskette.  This occurs even if the Windows 95 boot diskette is
already inserted in the floppy disk drive.  Select OK to continue.

 

Next, you are notified that the 

MTMCDAI

.

SYS

 file could not be found on the Windows 95

Setup Boot Diskette.  In the dialog that displays, specify that the file should be copied
from a:\, and then select OK.

The system’s hard disk drive contains Windows 95 Setup files in the

C

:\

WINDOWS

\

OPTIONS

\

CABS

 directory, as compressed .

CAB

 files.  When installing network

or video display adapter drivers, you can refer to the 

CABS

 directory when prompted for

the location of Windows 95 Setup files.  If you delete the 

CABS

 directory from the

system’s hard disk, you must have access to a Windows 95 CD-ROM to use Windows 95
Setup files.

On a system running Windows NT Workstation 3.51:

The first time you start the system, it boots to a Welcome screen instead of a Setup
screen.  Press 

CTRL

+

ALT

+

DELETE

 to display the logon dialog, and press 

ENTER

 or select

OK to log on to Windows NT Workstation.

You can set up a user account and join a workgroup or domain after you configure the
video display, the sound processor, and networking.

For more information on Setup, and on using the interface features of the operating system,
refer to the operating system documentation and Help.

Using the Welcome Dialog

After going through Setup, a Welcome dialog displays.  This dialog gives you easy access to a
few first-time startup tasks you should complete before proceeding.

Creating Backup Diskettes

Select Version Manager on the Welcome dialog to run the InterSite Version Manager utility.
Use this utility to create backup diskettes containing drivers and other system software
products that were installed on the system before shipment.  You may need these backup
diskettes later -- for example, if you have to re-install a device driver or the operating system.

CAUTION

If you do not use Version Manager to create backup diskettes for system software,  you may
not be able to re-install critical system software or the operating system if needed.

Содержание TD-20 Setup



































































Отзывы: