11
The video input/output (I/O) connectors include 75-ohm BNC connectors for SDI and
reference signal input, and SDI and Composite output. A 4-pin mini-DIN port is included
for S-video output. Refer to the following figure:
Video input and output are connected to the StudioZ workstation through ports on the
StudioZ SDI board.
Connections
Signal
Description
Input
SDI
75-ohm BNC coax connector
Reference Signal
75-ohm BNC coax connector
Output
S-video
4-pin mini-DIN connector
Composite
75-ohm BNC coax connector
SDI
75-ohm BNC coax connector
Connecting a Video Monitor
Connect your video monitor to the StudioZ SDI board using the recommended cables (see
the tables earlier in this chapter). Place the video monitor and the computer monitor at least
one foot apart to avoid synchronization interference.
The following instructions are guidelines for connecting your equipment. Refer to the
documentation delivered with your video monitor for detailed information on the ports to
which you should connect the SDI board.
