manualshive.com logo in svg

Intergraph RealiZm Graphics V25, Руководство пользователя по оборудованию

Поделиться
Скачать
Intergraph RealiZm Graphics V25 Скачать руководство пользователя страница 31

19

Problem

Action

No VGA bootup screen.

Check the VGA loopback cable.  Disconnect the
monitor cable from the Video port and connect it
to the VGA port.  If no display, check the system
board, monitor, monitor cable, and power to the
monitor.

Obtaining a Usable Video Resolution

The system operates in VGA mode when the Intergraph video display driver is not running to
accommodate all monitor types.  VGA mode is used during initial installation of the video
display driver and when experiencing video problems.

If you select a resolution that causes the monitor to display incorrectly, do not press

CTRL

+

ALT

+

DEL

 to log on to the Windows NT operating system.  Instead, use the Last Known

Good option to return to the last known good configuration recorded by Windows NT.

To use the Last Known Good option:

1.  Restart the system.

2.  Press the space bar at the following prompt:

 

Press space bar NOW to invoke the Last Known Good Menu

If using the Last Known Good option fails to correct the video display problems, you can
obtain a functional video resolution by restarting the system in VGA mode.

To restart the system in VGA mode:

1.  Restart the system.

2.  At the boot screen, select the following option:

Windows NT Workstation Version 4.00 [VGA mode]

Determining a Defective Unit

To determine a defective unit:

1.  Save and exit from all files, if possible.

2.  Shut down Windows NT, if possible.

3.  Turn off the power to the monitor and to the system base unit.

CAUTION

Always turn off the power to the workstation before connecting or disconnecting the cables.

4.  Check and reseat all board and cable connections as needed.

Содержание RealiZm Graphics V25





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды