Intergraph InterServe 80 SL, Настройка системы

Страница: 74 / 106

60
4. In the Setup menu, click Advanced. A list of parameters displays.
5. Click 1st Boot Device. An Options menu displays.
6. Click Floppy.
7. Press
ESC
, then click Exit and Save.
8. Restart the system.
Until the boot sequence is changed, the system will check for a bootable diskette in the
floppy disk drive before attempting to boot from the system’s hard disk drive.
Summary of Default and Fail-Safe Settings
The following table shows all the parameters available in the BIOS with the optimal and
Fail-Safe setting for each. The BIOS values are set to optimize system performance. Fail-
Safe settings are the minimum settings required to boot the system; these values do not
provide optimal performance. If you customize BIOS values, you can reset the settings by
selecting the “Optimal” option on the Default menu. See page 56 for details. N/A indicates
that a parameter is not available.
Setup Menu, Standard Submenu
Parameter Optimal Fail-Safe
Pri Master CD-ROM
Pri Slave Not Installed
Sec Master Not Installed
Sec Slave Not Installed
Date/Time N/A N/A
Floppy A 1.44MB
Floppy B Not Installed
Setup Menu, Advanced Submenu
Parameter Optimal Fail-Safe
1st Boot Device SCSI Disabled
2nd Boot Device Floppy Floppy
3rd Boot Device CD-ROM CD-ROM
4th Boot Device Disabled Disabled
Try Other Boot Devices Yes Yes