Intergraph InterServe 80 SL Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 106

background image

7

2. Connect one end of the external SCSI cable to the external SCSI port.

−

The standard Ultra SCSI port is located just under the AC Line Out connector.

−

The optional Wide Ultra SCSI port is located on the right side of the I/O panel.

3. Connect the other end of the cable to the SCSI device.

4. Set the SCSI ID of the device to an unused number between 1 and 6.

CAUTION

Do not use ID 0 or ID 7, which are used for other devices. Using these IDs can cause system
problems, including data loss.

5. Do one of the following:

−

If the device is the last or only device on the SCSI chain, enable SCSI termination

−

If the device is the first device or is between the first and last device on the SCSI
chain, disable SCSI termination

NOTE

If the last or only SCSI device is not internally terminated, make sure you connect an active
SCSI terminator to the open SCSI port. All other external SCSI devices must have
termination disabled or removed.

6. Ensure that the power switch on the SCSI device is in the off position, and then connect

the power cord to the device and then to an AC receptacle.

7. Connect the system power cord to the AC receptacle.

8. Turn on the power to the SCSI device and any other devices on the SCSI chain.

9. Start the system by pressing the Standby (power) button.

10. If necessary, install the software drivers and configure the drive according to the

vendor’s instructions. Refer to “Configuring SCSI Peripherals” in Chapter 3 for more
information.

What’s Next?

Intergraph Computer Systems installs the operating system through Phase I of the process.
From here, you can do either of the following:

u

Continue the installation. See Chapter 2, “Setting Up the Software,” for instructions on
setting up the operating system and associated system software.

u

Reinstall the operating system. See Chapter 7, “Reinstalling System Software,” for
instructions to install the software completely from CD-ROM.

NOTE

Before starting the system for the first time, you may want to learn more about system power,
startup, and shutdown. See Chapter 4, “Operating Notes,” for this information.

«
...
19
20
21
22
23
...
»

Содержание InterServe 80 SL











































































































Отзывы:

Нет отзывов

Похожие инструкции для InterServe 80 SL

Express5800/320Ma

Бренд: NEC Страницы: 80

Express5800/320Ma

Бренд: NEC Страницы: 90

NetScaler MPX 25100 40G

Бренд: Citrix Страницы: 15

SuperServer 1029U-T Series

Бренд: Supermicro Страницы: 1

Бренд: MISUMI Страницы: 18

PRIMERGY TX2540 M1

Бренд: Fujitsu Страницы: 92

PRIMERGY TX200 S5

Бренд: Fujitsu Страницы: 114

PRIMERGY TX300 S5

Бренд: Fujitsu Страницы: 142

PRIMERGY TX200 S6

Бренд: Fujitsu Страницы: 126

Server PRIMERGY TX1330 M1

Бренд: Fujitsu Страницы: 336

PRIMERGY TX300 S6

Бренд: Fujitsu Страницы: 122

Бренд: Fujitsu Страницы: 86

Бренд: Fujitsu Страницы: 109

PRIMERGY TX200 S5

Бренд: Fujitsu Страницы: 110

PRIMERGY TX300 S5

Бренд: Fujitsu Страницы: 118

Бренд: Fujitsu Страницы: 115

PRIMERGY TX200 S7

Бренд: Fujitsu Страницы: 90

PRIMERGY TX200 S6

Бренд: Fujitsu Страницы: 124

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды