Intergraph InterServe 80 SL, Настройка системы

Страница: 58 / 106

44
3. Select each of the following parameters and enter the appropriate values. For more
information, see the documentation included with the device.
Parameter Description
CYL Cylinders
HD Heads
WP Write Precompensation
LZ Landing Zone
SEC Sectors
4. When complete, press
ESC
or click the close box at the upper left corner of the window.
Date/Time
Select the Date/Time icon to display the current system date and time values.
To change the system date and time:
1. Click the incorrect value with the mouse pointer or press the
TAB
key until the value
highlights.
2. Click the + or - buttons to change the value, or enter the correct value from the
keyboard.
NOTE The time displays in 24-hour format.
3. Press
ESC
to save the new values and return to Standard Setup.
Floppy A, Floppy B
The Floppy A and Floppy B icons allow you to specify the type of floppy disk drive installed
in the system.
The floppy disk drive A parameter is preset to 1.44 MB 3.5-inch. Do not change the
parameter unless you replace floppy drive A with a different capacity disk drive.
The floppy disk drive B parameter is preset to Not Installed, unless an optional drive has
been installed before shipment. Do not change the parameter unless you install an optional
floppy disk drive.
To change the floppy drive parameters:
1. Select the Floppy A or Floppy B icon.
2. Press the up and down arrow keys or click in a box to select the correct parameter for the
floppy disk drive.