Intergraph InterServe 80 SL, Настройка системы, Страница: 46 / 106

32
To change the synchronous data transfer rate:
1. Insert the SYSUTIL diskette in the system’s floppy disk drive.
2. From the Start menu, click Shut Down. The Shut Down Windows dialog box displays.
3. Click Restart and then click OK. The system restarts and the MS-DOS Startup Menu
displays.
4. Select SCSI Configuration Utility and press
ENTER
.
5. From the main menu, select the SCSI host adapter that you want to configure and press
ENTER
. Two SYMB53C875 SCSI host adapters, one for each channel, are listed. Port
EC00 is the external bus; port E800 is the internal bus.
6. From the Utilities menu, select Device Selections and press
ENTER
.
7. From the Device Selections menu, select the SCSI device that you want to configure and
press
ENTER
.
NOTE Only eight SCSI devices are listed at a time. Select Device Selections 8-15 to list the next
eight SCSI devices.
NOTE If the device that you want to configure is not listed, exit the menu, repeat step 5 and select
the other host adapter. Then, continue with step 6.
8. Select Sync Rate (Megabytes/sec) and press
ENTER
.
9. Select the appropriate rate (Off, 10, 20, or 40) and press
ENTER
, select Exit This Menu,
and then press
ENTER
.
10. From the Device Selections menu, select Exit This Menu and press
ENTER
.
11. From the Utilities menu, select Exit This Menu and press
ENTER
. The Save/Cancel
menu displays.
12. Select Save Changes and press
ENTER
.
13. Remove the diskette from the system’s floppy disk drive, and then press any key to
restart the system.
Getting Operating System Updates
Microsoft Service Packs contain the latest improvements and system fixes for Microsoft
operating systems. Service Packs are created by Microsoft for post-release support. You can
get Service Packs from the Microsoft World Wide Web and FTP sites free of charge.
CAUTION If Intergraph Computer Systems provides a Service Pack through the IBBS or with a product
or system, it has been certified against Intergraph Computer Systems hardware as described
in the announcement of its availability. If you obtain a Service Pack from any other source,
be aware that it may not be certified against your Intergraph Computer Systems hardware.