Intergraph InterServe 80 SL Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 106

background image

23

After logging on to Windows NT in VGA mode, check for the following common
configuration problems and solutions.

u

A multi-sync monitor is connected to the system, but a multi-sync monitor type is not
selected, and the display driver cannot determine this by querying the monitor. Select
an appropriate multi-sync monitor type.

u

A selected resolution, depth, or refresh rate is not supported by the multi-sync monitor.
Try using different video display settings.

u

A multi-sync monitor is selected, but a monitor with different video timing (such as an
Intergraph InterVue monitor) is connected to the system. Select the monitor that is
connected to the system.

u

The monitor selection is inappropriate for the multi-sync monitor attached to the system.
Restart the system in VGA mode, then select a new monitor as described previously.

u

A graphics resolution and color depth has been selected that exceeds installed display
memory. Restart the system in VGA mode, then open Display in the Control Panel to
reinstall and configure the display driver as described in the video display adapter
documentation delivered with the system.

Restart the system to use the reconfigured video display driver. If problems persist, contact
the Intergraph Computer Systems Customer Response Center for help.

Installing MegaRAID Power Console Software

NOTE

This section only applies to systems with RAID hardware, either the AMI RAID controller or
onboard RAID.

To monitor and administer the system’s RAID disk array while running Windows NT
Server, you must install the MegaRAID Power Console software after configuring Windows
NT Server. Install the software from the backup diskette you created using Version
Manager. Refer to Version Manager Help for more information about using Version
Manager.

To install MegaRAID Power Console software:

1. Log on to Windows NT using an administrative account.

2. Insert the diskette containing the MegaRAID Power Console utility into the system’s

floppy disk drive.

3. Run

SETUP

.

EXE

on the diskette.

4. Respond yes or no appropriately to the questions about Windows NT. At the Welcome

dialog, select Next. The MegaRAID Install Destination Path dialog displays.

«
...
35
36
37
38
39
...
»

Содержание InterServe 80 SL











































































































Отзывы:

Нет отзывов

Похожие инструкции для InterServe 80 SL

ColorPASS-Z5000

Бренд: Canon Страницы: 134

Vlinx Serial Servers ESP901E

Бренд: B&B Electronics Страницы: 92

8676 - Eserver xSeries 335

Бренд: IBM Страницы: 172

Бренд: Goonas Страницы: 13

SUPERSERVER 1015B-3

Бренд: Supermicro Страницы: 98

Бренд: Moxa Technologies Страницы: 100

Бренд: National Instruments Страницы: 4

BizNAS D400 Series

Бренд: Tandberg Data Страницы: 2

Бренд: ADLINK Technology Страницы: 62

ANTMAINER S19j Server

Бренд: BITMAIN Страницы: 21

DIRECTORY SERVER 7.1

Бренд: Red Hat Страницы: 652

AirLive WP-201G

Бренд: AirLive Страницы: 56

Бренд: Intel Страницы: 77

Бренд: Lantronix Страницы: 76

Бренд: Planex Страницы: 16

Sun Server X4-4

Бренд: Oracle Страницы: 148

Sun Fire X2270 M2

Бренд: Oracle Страницы: 6

Бренд: IBM Страницы: 85

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды