I N T E R F AC E M O D E L 9 8 4 0
MO D E L 9 8 4 0 P G 3 0
P U B .
6 0 3 2 - 0 1
The format can also be repeated to view multiple items at once, up to four items. The
format is V(item 1)(unit 1)(repeat 1)(item 2)(unit 2)(repeat 2)(item 3)(unit 3)(repeat 3)
(item 4)(unit 4)(repeat 4), where item and unit can be any from the question mark
command. This format can also work with the two channel format from Example 3.
Example 4:
@123V500000226002
Acknowledge 4:
@ 123 Load A 120.45 Lb Torq B 120.45 LbI Load C 2.9993 Lb
@ 123 Load A 125.29 Lb Torq B 137.81 LbI Load C 2.9992 Lb
.....
@ 123 Load A 128.29 Lb Torq B 146.81 LbI Load C 2.9997 Lb
OPTION ~
Print Command (P)
If the print option is purchased, the print command will fetch a full set of readings (like
pressing the front panel Esc button). These will be in the units that are currently selected
on the numerical display. The format is P(repeat number), where the repeat number
must be 0, 1, 2, or 3. Repeat 1 will return 1 set of readings to the RS232 terminal.
Repeat 2 will return a set of readings approximately every three seconds (like the value
command). Repeat 0 will turn off printing that was started with repeat 2. Repeat 3 will
send one set of readings to the serial printer attached to the Model 9840 instead of to the
RS232 terminal.
Example:
@123P1
Acknowledge:
@ 001 Load A 0.01870 Lb
Peak A 0.50350 Lb
Vall A -0.48390 Lb
Load B 4.44386 Lb
Peak B 4.56994 Lb
Vall B 0.00000 Lb
Grs A 0.01680 Lb
Grs B -4.37317 Lb
Ch A+B 4.46470 Lb
Load C 7.24133 Lb
Peak C 7.91961 Lb
Vall C -1.80038 Lb
Load D -8.83013 Lb
Peak D 1.96601 Lb
Vall D -8.83320 Lb
Grs C 8.04560 Lb
Grs D -9.81467 Lb
