interco SKIPPY 62500-1, Руководство по эксплуатации

Страница: 45 / 56

SETTINGS / OPERATION
45
En
glis
h
Therapy tray table
The therapy tray table is supplied with a border as
standard�
Assembly
The therapy tray table is attached to the right arm rest
support� To do this, the arm support is removed from
the arm rest support and the holders of the therapy
tray table are mounted between the arm support and
the arm rest support� (Fig� 25 )
Adjustment
The therapy tray table can be rotated (Fig� 26 / 1 ), ad-
justed in width (Fig� 26 / 2 ) and adjusted in depth (Fig�
26 / 3 )� The respective screws must be loosened and
completely retightened after adjustment� The therapy
tray can be swiveled via the wing screw (Fig� 27 / 3 )�
Cushion for therapy tray table
Assembly
The therapy table padding is velcroed directly onto the
therapy tray table� (Fig� 27 )
7 . 2 . 5 . Head
Head rest
The SKIPPY
®
head rest is selected as standard from
the ALULINE range�
Assembly
The ALULINE universal holder is mounted to the back
rest using the screws supplied�
Adjustment
The height of the head rest can be adjusted using the
lower clamping lever on the universal holder (Fig� 28 )�
Depending on the model, the inclination and/or depth
of the head rest can be adjusted using the clamping
lever on the ratchet�
Important!
Always release only one clamping lever
and make the adjustment here� Only
continue with the next one after the previous one
has been secured�
Important!
The gap between head rest cushion and
back rest cushion must not be more
than 60 mm!
7 . 2 . 6 . Undercarriage
Push bar
Assembly
The screws are mounted directly on the adapter plate�
(Fig� 29 green)
Adjustment
The angle of the push bar can be adjusted using the
locking pins (Fig� 29 red)�
Fig 26
Fig 27
Fig 29
Fig 28
Fig 25
1
2
3