background image

16 Ga. Medium Crown Stapler 

Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm)

Model No. SN5016 

Item No. 64405

6

Interchange Brands  

Operator’s Manual

!

Safety Information

Important Safety Instructions for 

Operating Staplers

READ ALL INSTRUCTIONS

1 . 

OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY 

GLASSES WITH SIDE SHIELDS.

Danger to the eyes exists due to the possibility of flying fasteners 

and debris when operating the stapler . To guard against these 

hazards always wear safety glasses with side shields to protect both 

the front and sides . Make sure others in the work area wear safety 

glasses, too .
Eye protection equipment must conform to the requirements of 

American National Standards Institute, ANSI Z87 .1 .

The employer is responsible to enforce the use of eye protection equipment by 

the tool operator and other personnel in the work area .

2 . 

EAR AND HEAD PROTECTION MAY BE NEEDED IN SOME 

ENVIRONMENTS. 

Some work areas may include exposure to high noise levels which 

can lead to hearing damage . Always wear ear protection to protect 

your ears from loud noise . Wear head protection to protect your 

head from flying objects .

3 . 

KEEP FACE, HANDS AND FEET AWAY FROM FIRING HEAD AT ALL 

TIMES. 

Never place your face, hands or feet near the firing head .

4 . 

KEEP FINGER AWAY FROM TRIGGER WHEN NOT DRIVING FASTENERS 

TO AVOID ACCIDENTAL FIRING.
Always carry the stapler by the handle only . Never carry the stapler with your 

finger on trigger since you could drive a fastener unintentionally and injure 

yourself or someone else .

5 . 

NEVER POINT STAPLER AT YOURSELF OR OTHERS IN WORK AREA.
Respect the stapler as a working implement . Always assume the stapler contains 

fasteners and never point the stapler at yourself or others, whether or not it 

contains fasteners . If fasteners are mistakenly driven, it can lead to severe 

injuries . Never engage in horseplay with the stapler . 

6 . 

DRESS PROPERLY. 

Do not wear loose clothing or jewelry as they can be caught in moving parts . 

Rubber gloves and nonskid footwear are recommended when working outdoors . 

Wear protective hair covering to contain long hair .

7 . 

KEEP VISITORS AWAY. 

All visitors should be kept safely away from work area and should not handle the 

stapler .

8 . 

KEEP OUT OF REACH OF CHILDREN.

9 . 

DO NOT OVERREACH. 

Keep proper footing and balance at all times .

Содержание SN5016





















Отзывы: