16 Ga. Medium Crown Stapler
Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm)
Model No. SN5016
Item No. 64405
12
Interchange Brands
Operator’s Manual
Operating The Stapler
DANGER:
Operators and others in work area must wear safety
glasses with side shields . Eye protection equipment must conform
to the requirements of American National Standards Institute, ANSI
Z87 .1 .
Read and understand METHODS OF OPERATION below .
Methods of Operation
Explanation of the choice of triggering methods
(on some models)
This stapler is equipped with the safety/push lever and does not operate unless the
safety/push lever is depressed (upward position) .
There are two methods of operation to drive staples with this Stapler
■
Single Fire
The switch location is shown in
the illustration at the right .
For single fire operation, depress
the contact arm against the work
surface and pull the trigger . Tool
cannot fire a second staple until
the trigger is released and tool
can cycle .
■
Bump Fire (Multi-Fire)
The switch location is shown in
the illustration at the right .
For bump fire operation, hold the
trigger and depress the contact
arm against the work surface .
Turn Switch
to the right
for single fire
operation .
Switch
Turn Switch
to the left for
bump fire
operation .
Trigger
