16 Ga. Medium Crown Stapler
Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm)
Model No. SN5016
Item No. 64405
3
Interchange Brands
Operator’s Manual
Important Information
WARNING:
The warnings, cautions and instructions discussed
in this instruction manual can not cover all possible conditions and
situations that may occur . It must be understood by the operator
that common sense and caution are factors which can not be built
into this product, but must be supplied by the operator .
When using the tool, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to
equipment .
Read and understand tool labels and operating instructions, safety precautions and
warnings in this manual before operating or maintaining this stapler .
Failure to follow warnings could result in
DEATH or SERIOUS INJURY .
Most accidents that result from the operation and maintenance of staplers are caused
by the failure to observe basic safety rules or precautions . An accident can often
be avoided by recognizing a potentially hazardous situation before it occurs and by
observing appropriate safety procedures .
Basic safety precautions are outlined in the
“SAFETY” section of this Manual and in
the sections which contain the operation and maintenance instructions .
Hazards that must be avoided to prevent bodily injury or tool damage are identified as
DANGERS
or
WARNINGS
on the stapler and in this Manual .
Never allow the stapler to be operated by children or individuals who have not
reviewed this manual .
OPERATE THE STAPLER ACCORDING TO THIS MANUAL.
WARNING!
■
Always follow the tool manufacturer’s safety and
maintenance instructions .
■
Always wear safety glasses with side shields when operating
or servicing tools .
■
Always disconnect the air supply from the tool and empty the
magazine when servicing tools .
!
!
SAVE THIS MANUAL
FOR FUTURE REFERENCE!
