CHAPTER 6 |
Remote Telephone Access
Working with Remote Telephone Access Messages
Users wanting to add, remove, or change a message remotely must have a good understanding of the configuration
and messages in the
SBX
2
. The user must also know the message number associated with each message they want to
work with. This information is collected during configuration design and implementation.
To Remotely Access The SBX
2
1. Dial the Remote Access telephone number.
When the
SBX
2
answers the line, it responds Enter Access Code.
2. Enter the appropriate Remote Access code, followed by #.
The access code entered determines the functions and options that the user is allowed access to.
The
SBX
2
responds Enter Command.
3. Enter the command number (see
Remote Telephone Access Commands
on page 72), and follow the
SBX
2
responses until the desired command has been completed.
Note:
If an invalid command or message number is selected, the
SBX
2
responds with the following message:
Error - Invalid Command or Error - No or Invalid Message.
To Disconnect From The SBX
2
1. Complete the command.
2. Press 0, followed by #. The
SBX
2
responds Done, and disconnects the line.
Note:
If a remote command is not received within 30 seconds, the
SBX
2
automatically disconnects from the line.
To record a message remotely
1. Determine the number of the message you want to record.
2. Remotely access the
SBX
2
. See
Working with Remote Telephone Access Messages
on page 73 for
more information.
3. When the
SBX
2
responds Enter Command, press 7.
4. Press the message number (nnn) you want to record, followed by #.
5. When the
SBX
2
responds with a short beep, record the message.
6. Press # to stop recording. The
SBX
2
responds with Message
‘nnn’ recorded.
To Play A Message Remotely
1. Determine the number of the message you want to play.
2. Remotely access the
SBX
2
. See
Working with Remote Telephone Access Messages
on page 73 for more
information.
3. When the
SBX
2
responds Enter Command, press 8.
4. Press the message number (nnn) you want to play, followed by #.
SBX
2
plays the message.
5. Press # to stop playing the message.
Interalia
|
SBX
2
System Manual
Page 73
