CHAPTER 6 |
Remote Telephone Access
Once the code has been verified by
SBX
2
, the various activities listed on the next page can be completed by entering
the appropriate remote telephone access command. There are two ways to enter remote telephone access commands
- Interactive and Direct.
Commands
User Entries
Examples
Interactive
A single digit command, immediately
Enter 8#. The
SBX
2
then prompts Enter
followed by #.
Message Number.
Pressing # indicates the end of a
Enter the nnn #(where nnn is the mes-
command to the
SBX
2
. If required, the sage number). The
SBX
2
then prompts
system then prompts the user to the
the user to the next step or option.
next step or option, where they again
enter the command and #.
The
SBX
2
will give the user 10 seconds
to enter the message number.
Direct
A multi-level command, immediately
Enter 8 nnn #(where nnn is the mes-
followed by #.
sage number.)
The direct entry method allows
The
SBX
2
then prompts the user to the
advanced users to enter commands
next step or option.
quickly, without waiting for a prompt
from the
SBX
2
. Pressing # indicates
the end of a command to the
SBX
2
.
Note:
O
nce a digit is pressed, additional digits must be entered within 2 seconds, or the
SBX
2
will automatically terminate the entry.
Pressing # at any time during an entry will terminate the entry.
Interalia
|
SBX
2
System Manual
Page 71
