CHAPTER 5 |
Nodes & Program Configurations
MESSAGE Node
Each message has several configurable fields that affect its
functionality. To view message fields, double click on the
desired message number in the Config Builder. The
messages can be assigned the following characteristics:
••
Maximum Message Length - this limits the length of the
message so that one message cannot be recorded and
utilize all of the recording time in the
SBX
22
. This feature is
useful when different people may be recording messages.
••
On/Off State - messages can be turned off and on
remotely from any touch tone telephone. The default is On.
••
DTMF - the message can be interrupted by a DTMF tone if
configured. Rather than listen to the message,
callers can enter any DTMF digit and skip to the next
message or node in the call flow. The default setting
is ignore.
••
Backup to Flash Memory - default is to back up so
messages will be stored even in a power fail situation.
De-select if you don
’t wish to use Flash memory
••
Access Code - if set, you must enter a password before changing this message using the remote access feature.
Each message can have its own password or a password may be shared.
••
Filename - When messages are uploaded from the XMU+ each message is stored as a separate file and assigned a
default filename.
You can assign a new filename to the messages.
••
Directory - reflects the path or directory location of the .wav file for this message.
••
Comment - available for additional information about the message.
Interalia
|
SBX
2
System Manual
Page 57
