manualshive.com logo in svg

Interactive Technologies SceneStation, Руководство пользователя

Поделиться
Скачать
Interactive Technologies SceneStation Скачать руководство пользователя страница 65

SceneStation Installation and Programming Guide

Using the Programmer's Remote

  |  59

Copy Preset

While editing a preset, you can copy the properties of one preset to the preset you 

are currently editing.
Press the 

COPY

 button to temporarily switch to the Copy Preset mode.  The center 

LED on the station will blink White.
Then, enter the two-digit number of the preset you want to copy the data from.
All of the properties of the specified preset (the scene, fade and follow times, loop and repeat and 

indicator colors) will be copied to the current preset.
After copying the information, the preset is not saved yet.  The station remains in the Preset Edit 

mode so you can edit any of the properties before they’re saved.  Press 

ENTER

 to save the 

copied preset and/or your changes.  Press 

CLEAR

 to cancel the changes and return to the Idle 

Mode.
For example, while editing preset 15 you decide that you want to copy the information from 

preset 8.  Press:
    

COPY

 + 

8

The station will copy the data from preset 8 into the edit mode.
Then, you want to change the fade time to 3 seconds.  Press:
    

FADE

 + 

3

You can adjust other properties as well.  When finished making changes, press 

ENTER

 to save 

all of the changes.  In this example, preset 15 will be equal to preset 8, but have a fade time of 3 

seconds.

Содержание SceneStation

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды