Intepro systems PSI 9000 2U Series Скачать руководство пользователя страница 48

Страница: 48 / 88

PSI 9000 2U Series

3.4.3.2 Menu “User Events”

See

“3.6.2.1 User defined events” on page 60.

3.4.3.3

Menu “Profiles”

See

“3.8 Loading and saving a user profile” on page 61.

3.4.3.4 Menu “Overview”

This menu page displays an overview of the set values (U, I, P or U, I, P, R) and alarm settings as well as settings

limits. These can only be displayed, not changed.

3.4.3.5 Menu “About HW, SW...”

This menu page displays an overview of device relevant data such as serial number, article number etc., as well as

an alarm history which lists the number of device alarms that probably occurred since the device has been powered.

3.4.3.6 Menu “Function Generator”

See

“3.9 The function generator” on page 62.

3.4.3.7 Menu “Communication”

This submenu offers settings for digital communication via the optional or built-in interface. The button for the

Anybus modules (Anybus symbol) or the optional GPIB port opens one or more settings pages, depending on the

interface in use. There is furthermore an adjustable communication timeout, to make it possible to successfully

transfer fragmented messages (data packets) using higher values. In the screen for “Com Protocols” you can

enable both or disable one of the two supported communication protocols, ModBus and SCPI. This can help to

avoid mixing both protocols and to receive unreadable messages, for example when expecting a SCPI response

and getting a ModBus response instead.

•

For all Ethernet interfaces with two ports: “P1” is related to port 1 and “P2” to port 2, like

printed on the module face. Two-port interfaces will use one IP only.

IF Level 1

Level 2

Level 3 Description

Ethernet / ModBus-TCP

, 1 & 2 Port

IP Settings

DHCP

The IF allows a DHCP server to allocate an IP address, a subnet

mask and a gateway. If no DHCP server is in the network then net-

work parameters will be set as defined in item “Manual”

Manual

This option is activated by default. An IP address can be maually

allocated.

Gateway

Here a gateway address can be allocated if required..

Subnet

Here a subnet mask can be defined if the default subnet mask is

not suitable.

DNS 1

Here the addresses of the first and second Domain Name Servers

(DNS) can be defined, if needed. A DNS is only necessary if the

device has Internet access and should call Internet URLs, e.g. an

internal eMail system, in order to send an eMail.

DNS 2

Port

Range: 0...65535. Default ports:

5025 = Modbus RTU (all Ethernet interfaces)

502 = Modbus TCP (Modbus-TCP interface only)

IP Com

Settings P1
IP Com

Settings P2

AUTO

Settings for the Ethernet port such as transmission speed are set

automatically.

Manual

Half dup

Manual selection for transmission speed (10MBit/100MBit) and

duplex mode (full/half). It is recommended to use the “AUTO” option

and only revert to “Manual” if these parameters fail.

Full dup

10MBit

100MBit

Host name

Free choice of host name (default: Client)

Domain name

Free choice of Domain (default: Workgroup)

SMTP
Settings

Server IP

Mail server address, used to send eMails via this mail server, in

order to e.g. report an alarm.

Username

Password

Содержание PSI 9000 2U Series

























































































Результаты поиска

Содержание PSI 9000 2U Series

Отзывы:

Похожие инструкции для PSI 9000 2U Series

Бренды по названию

Популярные бренды

Intepro systems PSI 9000 2U Series, Руководство пользователя

Результаты поиска

Содержание PSI 9000 2U Series

Отзывы:

Похожие инструкции для PSI 9000 2U Series

Бренды по названию

Популярные бренды