33
PSI 9000 2U Series
PSI 9000 2U Series • DC Laboratory Power Supply • User Manual
2.
Installation & commissioning
2.1
Transport and storage
2.1.1 Transport
•
The handles on the frontside of the device are
not
for carrying!
•
Because of its weight, transport by hand should be avoided when possible. If unavoidable
then only the housing should be held and not exterior parts (handles, DC output terminal,
rotary knobs).
•
Do not transport when switched on or connected!
•
When relocating the equipment use of the original packing is recommended
•
The device should always be carried and mounted horizontally
•
Wear suitable safety clothing, especially safety shoes, when carrying the equipment. Its weight
can have serious consequences if dropped.
2.1.2 Packaging
It is recommended to keep the complete transport packaging for the lifetime of the device for relocation or return
to the manufacturer for repair. Otherwise the packaging should be disposed of in an environmentally friendly way.
2.1.3 Storage
In case of long term storage of the equipment it is recommended to use the original packaging or similar. Storage
must be in a dry environment. If possible seal in packaging to avoid internal corrosion from humidity.
2.2
Unpacking and visual check
After every transport, with or without packaging, or before commissioning, the equipment should be visually
inspected for damage and completeness using the delivery note and/or parts list (see section
“1.9.3. Scope of
delivery”
). An obviously damaged device (e.g. loose parts inside, damage outside) must under no circumstances
be put in operation.
2.3
Installation
2.3.1 Safety procedures before installation and use
•
The device may, according to model, have considerable weight. Therefore the proposed
location of the equipment (table, cabinet, shelf, 19” rack) must be able to support the weight
without restriction.
•
When using a 19” rack, rails suitable for the width of the housing and the weight of the device
are to be used. (see
“1.8.3. Specific technical data”
)
•
Before connecting to the mains ensure that the connection is as shown on the product label.
Overvoltage on the AC supply can cause equipment damage.
Содержание PSI 9000 2U Series
Страница 2: ......
