NOTE
The front panel of the device functions as the user interface and is used to perform all operations relating to the device.
10.2.1 Icon Description
10.2 Activating and deactivating the unit
7.1
12
13
14
15
16
17
18
11
19
20
24
23
21
22
Remote shutdown and Remote cooling/heating is optional
function.
Factory default has no remote cooling/heating.
When the remote control and wire controller used at the same
time, the unit will carry out the last command of arbitrary
terminal.
Remote shutdown has the highest priority. In the status of
remote shutdown, other controllers can’t start the unit.
SWITCH 2
If switch2 is closed, the unit will shift to heating mode forcibly;
If switch2 breaks the unit will shift to cooling mode forcibly.
The wire controller is optional.
Please use 3-core shielded wire to connect the wire controller and
the shielding layer must be grounded.
When connecting wire controller, host unit control panel is
mainly used for display which can carry out parameter inquiry
such as inquiry and checking, and can’t be used to set mode and
temperature.
10.1 To access the control panel,open the door
-remove the screw 1 and screw 2;
-lift the door 3.
Wire controller
Remote cooling/heating
