background image

A network mask is also a 32-bit binary pattern, and consists of consecutive leading 
1's followed by consecutive trailing 0's, such as 
11111111.11111111.11111111.00000000. Therefore, sometimes a network mask can 
also be described simply as “x” number of leading 1's. 
When both are represented side by side in their binary forms, all bits in the IP address 
that correspond to 1's in the network mask become part of the IP network address, and 
the remaining bits correspond to the host ID. 

For example, if the IP address for a device is, in its binary form, 
11011001.10110000.10010000.00000111, and if its network mask is 
11111111.11111111.11110000.00000000 it means the device's network address is 
11011001.10110000.10010000.00000000, and its host ID is 
00000000.00000000.00000000.00000111. This is a convenient and efficient method 
for routers to route IP packets to their destination. 

ISP Gateway Address: 

(see ISP for definition). The ISP Gateway Address is an IP 

address for the Internet router located at the ISP's office. 

ISP: 

Internet Service Provider. An ISP is a business that provides connectivity to the 

Internet for individuals and other businesses or organizations. 

LAN: 

Local Area Network. A LAN is a group of computers and devices connected 

together in a relatively small area (such as a house or an office). Your home network 
is considered a LAN. 

MAC Address: 

MAC stands for Media Access Control. A MAC address is the 

hardware address of a device connected to a network. The MAC address is a unique 
identifier for a device with an Ethernet interface. It is composed of two parts: 3 bytes 
of data that corresponds to the Manufacturer ID (unique for each manufacturer), plus 
3 bytes that are often used as the product's serial number. 

NAT: 

Network Address Translation. This process allows all of the computers on your 

home network to use one IP address. Using the broadband router's NAT capability, 
you can access the Internet from any computer on your home network without having 
to purchase more IP addresses from your ISP. 

Port: 

Network Clients (LAN PC) uses port numbers to distinguish one network 

application/protocol from another. Below is a list of common applications and 
protocol/port numbers: 

Содержание 524490
































































































































Отзывы: