background image

Items and meanings: 

Rule Name (a): 

Provide a name for the QoS rule (up to 15 
alphanumerical characters; e.g, "VoIP Phone") 

Bandwidth (b): 

Set the bandwidth amount of the QoS rule. You have 
to select the data direction of this rule (Upload or 
Download), and the speed of bandwidth limitation 
in Kbps, then select the type of QoS: 'guarantee' 
(guaranteed usable bandwidth for this rule) or 'max' 
(set the maximum bandwidth for the application 
allowed by this rule). 

Local IP 
Address (c): 

Specify the local (source) IP address 
that will be affected by this rule. Enter the 
starting IP address in the left field, and input the 
end IP address in the right field to define a range of 
IP addresses, or just input the IP address in the left 
field to define a single IP address. 

Local Port 
Range (d): 

Enter the range of local (source) port numbers 
that should be affected by this rule. If you want to 
apply this rule on ports 80 to 90, enter 80-90; if you 
want to apply this rule only to a single port, just 
input the port number, like '80'. 

Remote IP 
Address: (e): 

Specify the remote (destination) IP address 
that should be affected by this rule. Enter the 
starting IP address in the left field, and input the 
end IP address in the right field to define a range of 
IP addresses, or just input the IP address in the left 
field to define a single IP address. 

Содержание 524490
































































































































Отзывы: