Intelligent Charging IC8P, Руководство оператора

Страница: 20 / 46

IC8P Battery Charger/Analyser
Operator Manual
5.3.1 CHARGE FROM A LIBRARY ENTRY
•
Connect the battery to be charged and apply power to the unit.
•
From the MAIN screen select CHARGE followed by LIBRARY .
•
Using the

arrows move the high light to point to the battery.
•
Select EXECUTE.
•
If a blank entry is selected the unit will warn that no data is exists.
•
The unit will display the charge data for checking.
•
To begin the charge select START or TIMED .
•
If printer fitted and battery serial number set to on, the battery serial number
will be requested at this point.
5.3.2 CHARGE FROM MANUAL DATA
•
Connect the battery to be charged and apply power to the unit.
•
From the MAIN screen select CHARGE followed by MANUAL .
•
Enter the charge data as requested.
•
The unit will display the charge data for checking.
•
To begin the charge select START or TIMED .
•
If printer fitted and battery serial number set to on, the battery serial number
will be requested at this point.
5.3.3 CHARGE FROM PREVIOUS DATA
•
Connect the battery to be charged and apply power to the unit.
•
From the MAIN screen select CHARGE followed by PREVIOUS .
•
The unit will display the charge data for checking.
•
To begin the charge select START or TIMED .
•
If printer fitted and battery serial number set to on, the battery serial number
will be requested at this point.
Doc: DWG1062-06-R3 IC8P Operators manual.odt Page 20 of 46
Copyright Material of Intelligent Charging Limited © 2018
Printed On : 20/11/19