Intelix FLX-64, Инструкция по установке и эксплуатации

Страница: 28 / 44

FLX-64 Installation Guide
28
RS232 and TCP/IP Control
Routing Commands
RS232 Settings: 9600 baud, 8 Data bits, 1 Stop bit, Parity = None
TCP/IP Settings: User defined IP address (default IP address: 192.168.0.178), port 8080
There is either a period (
.
) or a semicolon (
;
) at the end of each command. These characters must be present for
the command to process correctly.
There are no spaces between any of the characters in the command string.
xx
= Input Number (input 2 would be 02)
yy = Output Number (output 3 would be 03)
<CR>
= Carriage return (Hex 0D)
<LF>
= Line Feed (Hex 0A)
Description Command Response
Route input
xx
to audio and video output
yy
xx B yy . xx B yy <CR><LF>
Route input
xx
to audio output
yy
xx A yy . xx A yy <CR><LF>
Route input
xx
to video output
yy
xx V yy . xx V yy <CR><LF>
Route input
xx
to all video outputs
xx
All.
xx
To All<CR><LF>
Route inputs to corresponding video outputs
All#. All Through.<CR><LF>
Turn off all video outputs
All$. All Closed.<CR><LF>
Turn on all video outputs
All@. All Open.<CR><LF>
Turn off specific video output yy
yy
$.
yy
Closed. <CR><LF>
Turn on specific video output yy
yy @. yy Open. <CR><LF>
Turn off all audio outputs
AudioSwitch$. Audio All Closed.<CR><LF>
Turn on all audio outputs
AudioAll@. Audio All Open.<CR><LF>
Turn off specific audio output
yy
yy Audio$. yy Audio Closed. <CR><LF>
Turn on specific audio output
yy
yy Audio@. yy Audio Open. <CR><LF>
02All.
Route Video and Audio from input 2 to all outputs
04$.
Turn off Video and Audio for output 4
02B03.
Route Video and Audio from input 2 to output 3
03B02,04.
Route Video and Audio from input 3 to outputs 2 and 4
Examples: