Intelix FLX-64, Инструкция по установке и эксплуатации

Страница: 30 / 44

FLX-64 Installation Guide
30
EDID Settings
The stock EDID for the inputs of the FLX-64 is 1080p with stereo audio. In order to change the EDID information for
an input, the EDID copy command will need to be sent to the matrix via RS232 or TCP/IP or managed through the
web browser setup interface (see page 32).
HDCP is enabled on all inputs of the FLX-64. If the video output of the matrix is going to a video recorder, video
converencing system, or other non-HDCP compliant device, the HDCP input compliance will need to be disable
to view non-encrypted content. Showing encrypted content on a non-compliant display will output a black video
image. In order to change the HDCP compliance for an input, the HDCP on/off commands will need to be sent to
the matrix via RS232 or TCP/IP or managed through the web browser setup interface (see page 32).
EDIDMyyBxx.
Copy video and audio EDID of output
yy
to input
xx
EDIDHyyBxx.
Copy video EDID of output
yy
and specify 2 channel PCM to input
xx
EDIDMInit.
Restore factory EDID information
/%I/ xx :0.
Turn off HDCP Compliance for input
xx
/%I/ xx :1.
Turn on HDCP Compliance for input
xx
Full EDID Copy
Hybrid EDID Copy
To copy the video and audio EDID information from output 3 to input 1, transmit the following command:
EDIDM03B01.
To turn off HDCP compliance for input 6, transmit the following command:
/%I/06:0.
Hybrid EDID copy is the preferred command to use when the audio is going to be routed to an analog audio output
of the matrix. To copy the video EDID information from output 2 and specify two channel PCM audio output to
input 4, transmit the following command:
EDIDH02B04.
Input HDCP Settings