6 Installing a Tool
6.3 Inserting the Tool Holder into the Spindle
75
4.
Tighten using the tool holder nut wrench.
5.
Further tighten the assembly using the
appropriate crescent wrench and the tool holder
nut wrench.
0
.
6.3.
INSERTING THE TOOL HOLDER INTO THE SPINDLE
Follow this procedure to insert the tool holder into the spindle.
Procedure: Inserting the Tool Holder into the Spindle
1.
Ensure that Emergency Stop button is released.
2.
Turn on the power switch.
3.
Ensure that the safety shield is open.
4.
While holding the tool by the bottom of the tool
holder, press the green drawbar button on the
spindle and insert the tool holder into the
spindle, then release the green drawbar button.
The tool should be sucked into the spindle.