Intelitek ProMill 8000, Руководство пользователя

Страница: 54 / 196

‎
5 Using the Control Software
‎
5.3 Software Interface 47
Absolute Position Open or close the Absolute Position Window.
See
‎
5.3.2.2 Actual Position Panel, pg. 54.
Machine Info Open or close the Machine Info panel.
See
‎
5.3.2.3 Machine Info Panel, pg. 55.
Jog Control Open or close the Jog Control Panel.
See
‎
5.3.4.1 The Jog Control Panel, 58.
Operator Panel Open or close the Operator Panel.
See
‎
5.3.4.2 The Operator Panel, pg. 60.
Verify Window Open or close the Verify Window.
See
‎
5.6 Verifying an NC Program, pg. 64.
Toolbars Open or close one of the toolbars.
Program Run/Continue Start or resume running the current NC program.
See
‎
5.7 Running an NC Program, pg. 71.
Verify Verify the current NC program.
See
‎
5.6 Verifying an NC Program, 64.
Estimate Runtime Estimate the runtime of the current NC program.
Pause Pause the NC program after the current line of NC code finishes
executing. Spindle continues to turn.
Feedhold Immediately pauses the NC program. Stops movement of all axes
while the spindle continues to turn.
Stop Immediately halts the currently running NC program. Stops both axes
movement and spindle.
Tool Setup Library Define tools. See
‎
5.3.1.3 Tool
Menu and ATC
Control Toolbar, pg.
50.
Select Tool Wizard Opens the Tool Height Setup Wizard. The
assists in setting tool heights and offsets.
Select Tool… Select a tool to use from a menu.
Configure ATC Set tools for use in the ATC.
Operate ATC Manually operate the ATC.
Setup On-line Change from simulation mode to on-line.
Simulation Click to change from on-line mode to simulation mode.
Set Position Establish the X, Y, and Z position of the tool.
See
‎
5.4 Homing, pg. 61.
Zero Position Set the current tool position to X=0, Y=0, Z=0.
See
‎
5.4 Homing, pg. 61.