Cedar 880AG Enterprise Dual-Radio AP/Bridge
Example:
Cedar#
show radio 1
11.5.6 config
radio
Syntax:
config radio <1 | 2> {
[rf < on | off >]
[freq < a | super-ag > for radio 1,
<b|g|bg|super-ag> for radio 2]
[channel < see below >]
[auto_channel_list < see below >]
[basic_rates < see below >]
[supported_rates < see below>]
[tx_power < auto | 0-20 dbm>]
[mode < ap | brglnk | ap,brglnk>]
[role < base | non-base>]
[repeater < on | off>]
[beacon <20-1000 ms>]
[preamble < long | short>]
[fragm_threshold < 256-2346 >]
[rts_threshold < 0-2347 >]
[cts_protection <on | off>]
[antenna < diversity | 1| 2 >]
[drop_load < off | 0-99 >]
[deny_load < off | 0-99 >]
[intra_bss < on | off>]
[rogue_detection < on | off>]
[wmm < on | off >]
[distance < 0-50 kilometers >]
[wlanadd < wlan name >]
[wlandel < wlan name>]
[brglnkadd < brglnk name>]
[brglnkdel < brglnk name>]
}
Description:
rf:
Enable/Disable radio frequency.
freq:
Communication mode between wireless clients and the AP.
channel:
Channel used between wireless clients and the AP.
auto: AP automatically chooses a relatively unused channel.
freq
b,g,
bg:
1-14
freq a: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
freq super-ag, radio 1: 40, 48, 56, 153, 161
91