Intelicis Cedar 880AG Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 105

Intelicis Cedar 880AG Скачать руководство пользователя страница 41

Cedar 880AG Enterprise Dual-Radio AP/Bridge

MAC profiles in the system. Click the existing profile name to enter the editing screen or
click the

Add

button to create a new one.

Profile Name

Enter a descriptive name for the profile. The maximum length is 15.

Authentication Method

•

Reject all users except for the ones on the Permit List.

•

Allow all users except for the ones on the Deny List.

•

Consult RADIUS Server if not found on the Permit or Deny Lists:

The

client’s MAC address is first checked against the Permit and Deny Lists. If it is
on the Permit List, access is granted. If it is on the Deny List, access is denied.
If the client’s MAC address is on neither one of the lists, the RADIUS server is
checked. If it is on the RADIUS server, access is granted, otherwise, access is
denied.

Permit List

A local list of the entire MAC addresses which are to be permitted access.

Deny List

A local list of the entire MAC addresses which are to be denied access.

41

«
...
39
40
41
42
43
...
»

Содержание Cedar 880AG










































































































Отзывы:

Нет отзывов