Cedar 880AG Enterprise Dual-Radio AP/Bridge
•
Add a WLAN to this Radio from the available WLAN list.
•
Delete a WLAN from this Radio.
Bridge Link
•
Add a Bridge Link to this Radio from the available Bridge Link list.
•
Delete a Bridge Link from this Radio.
Auto Channel List
Auto Channel List is a list of preferred channels that the administrator wishes the
AP to scan first when channel is set to “Auto”.
•
1-14:
used
for
frequencies b, g, and bg
•
36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165:
used for
frequency a
Tx Rates
Select a frequency allows the AP to automatically set the default basic and
supported rates. The user can then further fine tune the rates.
•
6, 9, 12, 18, 24, 36, 48, 54:
for
frequency a
•
1, 2, 5.5 or 11:
for
frequency b
•
6, 9, 12, 18, 24, 36, 48, 54:
for
frequency g
•
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or 54:
for
frequency bg
Beacon
Beacon frames are transmitted by an AP at regular intervals to announce the
existence of the wireless network. This parameter has a range of 20 to 1000 ms. The
default setting is to send a beacon once every 100 ms.
Preamble
The preamble is used to allow stations to synchronize with the access point signal.
•
Long:
The long preamble uses the legacy 802.11 1 and 2 Mbps DSSS header.
•
Short:
The short preamble is provided to improve the efficiency of the
network’s throughput.
Fragmentation Threshold
The fragmentation threshold limits the size of packets transmitted on the network. If
a packet exceeds the threshold, packet will be fragmented and sent as multiple
frames. The range is 256 to 2346. The default setting is 2346.
RTS Threshold
RTS/CTS (Request to Send/Clear to Send) are used to control station access to the
AP. A station initiates the process by sending a RTS. The AP receives the RTS and
responds with a CTS. The station must receive a CTS frame before sending data.
The range is 0 to 2347. When set to 2347 (the default setting), RTS is disabled.
55