Cedar 880AG Enterprise Dual-Radio AP/Bridge
Save System Configuration
All configuration changes must be saved into the system. This step is required;
otherwise changes will be lost after reboot.
Reset to Manufacture Default
This operation will reset Cedar to all of its manufacturer’s default values.
Execute CLI Command File
The administrator can put all the CLI commands in a batch file and execute them
together. Command batch files are especially useful when the administrator needs to
make sizeable configuration changes. One of the following methods can be chosen:
•
Copy the command file to a local FTP server root directory. Make sure the file
can be retrieved via “anonymous” login with no password.
•
Copy the command file to a user’s FTP home directory. Make sure the file can
be retrieved by logging in with the user’s username/password.
Enter the FTP Server IP address and the username and password Cedar uses to log
in to the FTP Server. If the username and password are not specified, Cedar logs
into the FTP server as “anonymous” with no password. Cedar retrieves the specified
CLI command file and executes it immediately.
Export Configuration
The administrator can export the existing configuration to a file for archiving
purpose. If for any reasons, a recovery is required. The export file contains useful
configuration information.
26