Intel Wireless EthernetAccess Point Скачать руководство пользователя страница 29

 

29

 

 

Outside the U.S.A. 

Contact your local Xircom supplier or Xircom regional office.  
Your Xircom contact will discuss your problem to confirm the defect. If 
warranty or return service is needed, you’ll receive a Return Material 
Authorization (RMA) number. Replacement Product will be shipped when the 
original Product has been received by Xircom.  
Ship your return Product prepaid, with the RMA number clearly visible on the 
outside of the shipping package, to:  

From the U.S.A. 

Xircom Service Department 
2101 Corporate Center Drive 
Thousand Oaks, CA 91320-1422  

From outside the U.S.A. 

Contact your local Xircom supplier or Xircom regional 
center for shipping instructions.  

Returned Products may need to include, if requested by Xircom, all other 
components from your original package, including the Product and any 
cables, connectors, software media, and user documentation. Be sure to 
enclose a copy of your purchase receipt or other proof of purchase 
confirming that you are the original purchaser.  

Limitations 

Our warranty is subject to the following limitations:  

x

We do not cover or accept liability for any injury, damage, breakage or 
failure caused by misuse, abuse, acts of Nature, accidents (e.g., 
dropping the Products or software media), failure to follow instructions 
and procedures contained in the user documentation, electrical 
mishaps, causes beyond our control, or claims by other than the original 
purchaser.  

x

We will not honor, and will consider our warranty voided, if there has 
been any (1) tampering with the Product’s external label or serial 
number, (2) attempt to open the Product’s case, (3) modification or 
alteration of any component, housing, connector, or other physical 
attribute of the Product, or (4) attempted or actual repair by anyone 
other than an authorized Xircom technician.  

Disclaimer 

THIS LIMITED WARRANTY IS THE ONLY WARRANTY WE MAKE FOR 
THE PRODUCT AND SOFTWARE. TO THE EXTENT ALLOWED BY LAW, 
NO OTHER WARRANTY APPLIES, WHETHER EXPRESS, IMPLIED, OR 
STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY, OF 
FITNESS FOR A PARTICULAR PURPOSE, OR OF NON-INFRINGEMENT. 
XIRCOM WILL NOT BE LIABLE OR RESPONSIBLE FOR ANY 

Содержание Wireless EthernetAccess Point

































Отзывы: