Intel Wireless EthernetAccess Point, Руководство по установке

Страница: 23 / 32

23
button for the approximate length of time below to trigger the events
described:
1-2 seconds
Unlocks the Access Point to make it available for SNMP
network management, after having locked it with the Lock
button on the WLAN Security tab in Access Point Manager,
or the Lock Access Point button on the Security Against
Unauthorized Configuration in the browser-based interface.
10-15
seconds Resets the Access Point to factory settings (hard reset) for
IP address, network ID, security level and encryption key.
The ACTIVITY light on the top of the unit will cycle on and
then turn off until the reset button is released. After this type
of reset, KickStart must be run again to reconfigure the
Access Point IP address and other settings.
15 seconds
or more Resets the connection to the wired LAN. The ACTivity light
on the top of the unit will cycle on, then turn off until the
reset button is released. The LINK light above the Reset
pinhole will cycle off and on after the reset button is
released.