manualshive.com logo in svg

Intel Wireless EthernetAccess Point, Руководство по установке

Поделиться
Скачать
Intel Wireless EthernetAccess Point Скачать руководство пользователя страница 25

 

25

 

 

Regulatory Notices 

This section provides the following notices:  

x

FCC Part 15 Declaration of Conformity and Regulations 

x

Mexico Domain and Channel Requirements 

x

European Community CE Mark Declaration of Conformity 

x

Safety Notices 

FCC Regulations Part 15 Declaration of Conformity 
(DoC) 

Xircom, Inc., an Intel company, declares that the equipment described in this 
document is within the requirements of the Code of Federal Regulations 
listed below: 
Title 47 Part 15, Subpart B, Class B for a digital device. 
This declaration is based upon the compliance of the Intel Wireless Ethernet 
Access Point model APWE1100 to the above standards. Xircom has 
determined that model APWE1100 has been shown to comply with the 
applicable technical standards if no unauthorized change is made in the 
equipment and if the equipment is properly maintained and operated. 
These units are identical to the units tested and found acceptable with the 
applicable standards. Records maintained by Xircom continue to reflect that 
units being produced under this Declaration of Conformity, within the 
variation that can be expected due to quantity production and tested on a 
statistical basis, continue to comply with the applicable technical standards. 
Responsible Party: R.W. Bass, Vice President and General Manager, 
Xircom, Inc., an Intel company, 2300 Corporate Center Drive, Thousand 
Oaks, California 

FCC Rules and Regulations - Part 15 

This device complies with Part 15 of the FCC rules. Operation is subject to 
the following two conditions: 
1 

This device may not cause harmful interference and, 

2 

This device must accept any interference received, including 
interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a 
Class B digital device pursuant to Part 15 of the FCC rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 

Содержание Wireless EthernetAccess Point

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды