Intel Wireless EthernetAccess Point, Руководство по установке

Страница: 15 / 32

15
browser versions installed: Microsoft Internet Explorer versions 5.0 or 5.5 or
Netscape Navigator versions 4.78 and 6.0.
When you use KickStart to find an Access Point with the correct IP address
settings, KickStart will automatically launch the AP Configurator tool in your
default browser.
Important: The browser-based AP Configurator cannot be used to change
IP address settings. If you want to change IP settings, you have to rerun
KickStart, go to the screen Change IP Settings and make the changes there.
You may also have to reset the Access Point before running KickStart to
change the IP settings.
Step 4: Advanced Configuration
Starting the browser Interface
When there is no DHCP server in your network, you can assign an IP
address to the Access Point and start up the browser interface with the
KickStart application.
The KickStart application is needed when:
x
You start the Access Point for the first time, or
x
You have reset the Access Point to factory defaults (see Resetting to
the default factory settings) and must configure the IP address settings
again.
x
You need to change the IP address settings
Browser interface is launched
Once the KickStart application has finished and the Access Point is available
for configuration on the network, the browser interface application is
launched in your default web browser. Important: It is strongly
recommended that you bookmark the Access Point location in your browser.
If it is not bookmarked, you will have to type in the Access Point IP address
each time you wish to access the AP Configurator.
You can now edit the settings for the Access Point.
Launching browser interface manually
If you know the IP address of an Access Point, you can launch the browser
interface in a web browser for editing.
1. Open a web browser (Microsoft Internet Explorer versions 5.0 or 5.5 or
Netscape Navigator versions 4.78 and 6.0)